Rocker AND Side Mldg. Clips & Plugs
For all vehicles
Parts
Rocker AND Side Mldg. Clips & Plugs
Rocker Mldg Clip - For the WIDE rocker mldg. CLips measures 1-1/2" wide from left to right in picture and 1-5/16" top / down.
$4.95
View Part
Rocker AND Side Mldg. Clips & Plugs
Rocker mldg clip set (1965 Coronet 500 model) plus others listed... 1-5/16 x 1-1/16" - 1966 Barracuda rocker mldg.
$74.00
View Part
Rocker AND Side Mldg. Clips & Plugs
Rocker molding trim clip. 1.215 long. May fit other models as well. (sold each)
$5.00
View Part
Rocker AND Side Mldg. Clips & Plugs
Fish Gill Rocker mldg hardware screws (1 set for 1 rocker panel mldg)
$9.50
View Part
Rocker AND Side Mldg. Clips & Plugs
Rocker mldg clip kit - Pot metal retainers (black plastic sheetmetal plug with screws). Used to hold on the pot-metal pieces in front of the rear wheels along with the nylon clips for the thin alum. rocker mldg. Mostly found on the West Coast Specials Barracuda's this kit handles the rocker mldg and the pot-metal chrome
$49.95
View Part
Rocker AND Side Mldg. Clips & Plugs
Rocker Moulding Clip - Each (white nylon clip with center hole plug included)
$3.75
View Part
Rocker AND Side Mldg. Clips & Plugs
Rocker Mldg Clip kit - (18) nylon clips (2) metal clips.
$78.00
View Part
Rocker AND Side Mldg. Clips & Plugs
Rocker Mldg “Black Stripes” for mldg. Sticky back high quality individual decals (Valiant Signet Models) Enough decals for one rocker mldg. Save the hours of taping off each strip and hand painting - these are easy to install and long lasting. (1 equals 1 rocker mldg)
$39.00
View Part
Rocker AND Side Mldg. Clips & Plugs
Clip plugs or centers. This is NOT the clip. For the clip see #RS-80 or #RS-80S as well as any other plastic plug that needs a round plug for the center. Note: These work well for 1964-65 Valiant side mldng (Signets), 1967 GTX Rocker Molding Clip Plugs, Various other clips (plugs).
$0.65
View Part
Rocker AND Side Mldg. Clips & Plugs
Full set of (10) round plugs / centers. These are NOT the clips. For the clip see #RS-80 or #RS-80S.
$5.50
View Part
Rocker AND Side Mldg. Clips & Plugs
Rocker Molding Clip - Original Chrysler #6001 428
$3.95
View Part
Rocker AND Side Mldg. Clips & Plugs
Rocker Molding clip Kit. For B-Body these are for the Dodge Rocker mldgs only. Please Note: This clip may not fit for original moldings for a 1969 Barracuda. Also, to apply on Dodge Darts with new molding # PM-CMR6769A (not original rocker moldings but the reproductions ones) one has to obtain 1/4 inch stainless steel washers and drill out the washers with 5/16" bit and mount behind each clip to allow the clip to be pushed away far enough from the vehicle to then mount the rocker mldg to the vehicle. Without the washer, the rocker mldg will touch the paint BEFORE the clip "snaps" into place on the backside of the rocker molding (20 piece kit)
$39.00
View Part
Rocker AND Side Mldg. Clips & Plugs
Rocker Moldings Clip (each) (Note: Coronet models need (20) rocker mldg clips) Measurements are 1" wide by 2-3/4" length.
$4.00
View Part
Rocker AND Side Mldg. Clips & Plugs
Rocker Molding Clips (set of 18) Please NOTE: Coronets need (20) rocker mldg clips (See Part #RS-663 for the (2) extra needed to order)
$74.95
View Part
Rocker AND Side Mldg. Clips & Plugs
Square Rocker Molding Clip for 1967 GTX. Note: Can also fit for 1964-65 Barracuda / 65 Valiant Signet models rocker mldgs with slight sanding down on ends to fit . CLIP ONLY!! Plug needed for this part #:: GM-1510P. If installing on A-body - please call for technical advice on how to use for install on rocker mldgs.
$5.00
View Part