Convertible

Here we have New Pre-made Convertible tops for your Mopar. Quality grade materials to assure best fit and longevity. Only the stock colors we stock on hand. Other colors can be ordered with longer lead times. All our tops do not include the rear windows. If you need a rear window - see our Misc. Convertible Top parts section later in this section. Pads are NOT included - see our Misc. Convertible parts for listings. All deck seams are dielectrically sealed. Plastic windows (.040 gauge and AS-6 Certified) are dielectrically sealed or are sewn and sealed into the rear curtain or panel). Nylon zippers are utilized on rear curtains, unless brass is specified. Note: Pinpoint Grain tops were for most models between 1962 to 1967. Colonial Grain tops were for most models between 1968 to 1971 Do to text limitations on this website - further details can be explained through our customer service dept.

Rear windows for convertible tops and maintenance supplies

These are newly manufactured convertible top boots for your Mopar. They come in a variety of stock colors and in the correct vinyl grains. Only the stock colors (Red, Black, White, Pearl White, Light.Blue, Navy Blue, Tan) we stock on hand. Other colors can be ordered with longer lead times. "None of the top boot clips are installed". Most boots come with a bag of snaps to install for better fit for the boot to your particular car All Prices shown are for BLACK ONLY ! Any color other than black (includes white) is a 15% surcharge to the price shown.

Features correct stainless finish with factory countours and can be mounted using original hardware or reproduction hardware.

All well liners come in black. Other colors are available for custom cars at additional cost. Plastic strips with snaps are included as applicable.

All cylinders are brand new reproductions that correctly replace leaking or seized originals. All of the cylinders listed fit either side and are available individually or as a pair.

NEW !!! These are New injected molded rear side panels for your 1967-69 A-Body. Exact for 67-69 Darts and 99% exact for the 1967-69 Barracuda. The Barracuda has a slight curve on the very top of the panels whereas the ones we are tooling from are Darts that are flat. We will have stocked on our shelves in Primer and ready for paint. Original textured finish on the bottom of the panel as well as the smooth surface on the top end. Between these two surfaces is a NEW replacement chrome trim as well that is sold separately and is NOT included with these panels (See # TL-2787948). This panel does comes with NEW armrest pads however - choose Black or White - white being for vinyl die purposes to match to your interior color!!. Our New Arm rests are a bolt-through design for better mounting and won't be prone to falling off as the originals once did. Please Note - The top smooth sections on these panels are not finished and will show some sanding marks as they are in primer only

Convertible Rear Side Panel Components

These are the usual "Pot-metal" moldings that fit between the stainless rear boot molding and the side glass stainless top rail moldings. They are usually only a few inches long and are very tough to find or even Re-Chrome if you even have them. Usually very pitted. Now we have these New Reproductions that are not made from pot-metal, but an alloy-based metal so that they won't pit.

Here we have NEW reproduction curb door sliding wedge strikers. These are chrome pieces that mount to the inside of the door jamb area. They help guide the door shut correctly and found usually only on convertible vehicles which are more prone to body flex. IF you have missing ones... best to get some on to keep that door aligned and working.

Sets include 2 wedges and 4 correct molding screws