Fender Emblems
For all vehicles
Parts
Fender Emblems
Drivers side "Barracuda" fender emblem - 9-3/4" in length and stands 1-1/8" at it's tallest point. -The pins are the same on the driver and passenger side except that the second pin from the beginning on the driver side is mounted on the second "a" in the word Barracuda, and on the passenger side is mounted on the second "r" in the word Barracuda.
$105.00
View Part
Fender Emblems
Passenger side "Barracuda" fender emblem - 9-3/4" in length and stands 1-1/8" at it's tallest point. -The pins are the same on the driver and passenger side except that the second pin from the beginning on the driver side is mounted on the second "a" in the word Barracuda, and on the passenger side is mounted on the second "r" in the word Barracuda.
$105.00
View Part
Fender Emblems
Fender Emblem - "Signet 200" Reproduction. Original Chrysler part number #2417 703.
$98.00
View Part
Fender Emblems
"Commando V8" - Repro of the large nameplate with the black painted letters, and the red and chrome checkered flag Dark Blue within the large "8".
$48.00
View Part
Fender Emblems
Fender Emblem - "Signet 200". Also found for 1965 Canadian Valiants.
$94.00
View Part
Fender Emblems
Fender nameplate "GTX". Brushed Satin Finish. Mounts directly beneath the "Belvedere" nameplate on fender. #2785 518
$59.95
View Part
Fender Emblems
Trunk / Fender nameplate "GTX". Also used for the rear seat. See part #PI-81067 GTX if needing the emblem with the backing plate for the rear seat option. For 1967, 1970-72 GTX Trunk lid, 1972-74 Fender, and 1973-74 Hood. Original part # 2840 214
$49.00
View Part
Fender Emblems
Fender nameplate "Satellite". Tri-colored reliefs as originals. Use 2 per car. Will not fit for 1968 as mounting tab is located differently.
$79.00
View Part
Fender Emblems
Formula "S" fender emblem. Tabs are vertical to each other on the backside.
$92.00
View Part
Fender Emblems
GT fender emblem "Dart GT" - discount exempt - original part # 2582 375
$89.00
View Part
Fender Emblems
"GTS" fender letter set - Black. These have a slight curve to them to fit properly on the fender...
$64.00
View Part
Fender Emblems
GTS nameplate with connected letters as used on the front fenders (without "Bumblebee" stripes)
$79.00
View Part
Fender Emblems
Fender and rear tail panel nameplate - "DUSTER" - Does NOT fit 1972 340 models
$84.00
View Part
Fender Emblems
"Dart" Quarter panel letters (set) 1965, 66 Darts - reproductions. Original chryler part numbers were : #2526 250, 2526 251, 2526 252, 2526 253. Also for 1966 Dart Front Fenders for 2dr Sedans, 4dr Sedans and Wagons. NOTE - Be sure to check that "D". Are the mounting pegs on the back diagonal or are the Straight across from each other? This kit has the pegs on back for the "D" that are straight accross from each other - late production version where we need to swap out the "D" for part # 305-63994 that is the "D" with the diagonal mounting studs on the back. So please be checking car old emblems or the holes on the side of the quarter before you place an order...for website orders put in the notes on the order if you need to swap out the "D" or not to the one with diagonal pegs on the back.
$115.00
View Part
Fender Emblems
"Charger" Script Emblem - 1971-73 Fender emblem & C-Piller Emblem & For 1973-74 Door emblem - Original p/n 3504 807
$59.95
View Part
Fender Emblems
"383 Four Barrel" nameplate on fenders - Red on chrome. (discount exempt)
$59.95
View Part
Fender Emblems
"GT" emblem (1963 Fender emblem and for 1964 its on the C-pillar) - Original part #2255 116
$62.00
View Part
Fender Emblems
"Coronet" Fender emblem 65 on front of fender, 66 towards rear of front fender.
$125.00
View Part
Fender Emblems
Formula "S" Reproduction Fender Emblem. Original part number was # 2579 442. Tabs are in horizontal position when installing.
$75.00
View Part
Fender Emblems
Top Fender mdlg (tri-colored is painted) original part #2582 095 - Drivers side . Dart GT models.
$185.00
View Part
Fender Emblems
"V EIGHT" fender emblem #2579 612 For small block cars only. For the big block cars, see 67C-VC202.
$48.00
View Part
Fender Emblems
Fender "fish" passenger side emblem #2785 320 - 2-9/16" between the mounting pegs.
$64.00
View Part
Fender Emblems
Fender "fish" Drivers side fender emblem - reproduction. Original part was #2963 657. Pins are 1-3/8" apart from each other.
$68.00
View Part
Fender Emblems
Fender "Fish" Passenger side fender emblem - reproduction. Original part number was $2963 656
$68.00
View Part
Fender Emblems
"Valiant" Fender nameplate. These fit only 4-door cars 1970-72 & ALL Valiant 1973-74. This emblem is NOT correct for "Scamp" models. Original part# 3504077 or 3680462.
$39.00
View Part
Fender Emblems
"Hemi" fender / Door panel emblem - This emblem is 5-1/4" wide and 1-1/8" tall. Thickness at top is 1/8" and at bottom is 5/16". The pin layout is in the bottom picture where the HEMI lettering would be upright like the top picture. (discount exempt)
$74.95
View Part
Fender Emblems
Triad emblem - Dodge triad logo emblem (located on the sail panel of models with vinyl top for 1969-70 Dart as well as some fenders on 70 Dart.). 1968 Dart trunk. Will also work on 1964-65 Coronet as fender emblem. Also for 1970 Challenger Hood emblem for standard flat hoods or 70 Shaker hoods - NOT the R/T hood.
$49.00
View Part
Fender Emblems
Charger "R/T" fender and trunk lid nameplate (adhesive). Use with part #MR-VC145. Use 3 per car
$65.00
View Part
Fender Emblems
Super Bee "383 Magnum" fender nameplate. Used on cars without Ramcharger hoods. Use 2 per car.
$49.00
View Part
Fender Emblems
"340" fender nameplate adhesive-[70 Dart Swinger, 71-72 Dart & Demon, 73 Dart Sport]
$79.00
View Part
Fender Emblems
"Challenger" nameplate. Meant to be Adhesive backed. 70 Trunk, 71 Fender and Tail Panel, 72-74 Quarter Panel Emblem. PLEASE NOTE - this emblem does NOT come with adhesive backing on it - you have to choose if your gluing it on or using 3M double sided adhesive tape. We do not supply the adhesive tape or glue as to do so would double the cost of this item with the labor costs that would be required to hand cut an adhesive tape for an emblem.
$69.00
View Part