Fuel Vapor / Line Components

Concouse Fuel line kits. These fuel line kits include the correct "KV" and "KV Dash" (1970 & Up) stamped rubber hose, crimp clamps and spring clamps to complete the installation of fuel system. Rear kits include the correct length ground strap in Stainless Steel.

Don't settle for incorrect worm gear hose clamps when installing your new reproduction fuel line! Kits include three feet of universal fuel hose, eight color-coded spring type, and eight keystone style pinch clamps, to correctly outfit most applications.

Fuel vapor baseplate kits for 1970 E-Body models (with a vent on the filler neck) installs in the passenger side of the trunk and allows the tank to "breathe". This kit includes the baseplate, 1 cork base gasket, 2 rubber grommets, one foot of 7/31" hose and 4 Oetiker Step_Less (TM) ear clamps.

An often rusted and decayed part. Replace to give your trunk compartment the finishing touch. Kit comes complete with OEM grommets, correct SEMS screws and die-cut closed cell foam gasket. NOTE: This will not fit California Emissions cars.

All our Fuel Vapor Seperators are powder coated for a much superior finish rather than painted like our competition which is subject to pealing paint and rusting.

This new Reproduction grommet for B- and E- body models are used to protect the fuel vapor lines where they pass through the trunk floor. Also used for the Shaker hood and speedometer cables where they pass through the firewall.

An extensive selection of tube clamps, line clips, and related hardware to fit brake lines, fuel and vapor-return lines, and transmission cooler lines for a wide variety of makes and models. Each duplicates the appearance and function of the original factory part. Mounting hardware not included with clamps. Note: Many of these clamps may be used in numerous different locations on any given vehicle; it is, however, impossible to pinpoint every specific application for every one of these parts.

Aftermarket crimp-on "Keystone" clamps just like the factory originally used on all fuel and vapor lines. Use part #CJ-3900 for proper installation. Sold individually