Wiper Motors
For all vehicles
Subcategories
3-Speed Wiper Motors:
Listed are the external differences between our standard and premium 3-sped wiper motors. The standard motors will work fine for those who are looking for a high-quality functioning motor but may not be as concerned with date codes and part numbers. Our premium motors have all the right part numbers stamped into the motor barrel. Although the seals are included with the motors, the three nuts used to mount them to the firewall studs are not. However, they're available individually as part #AE-FD9021or packaged as a set of three under part #AE-FD9021SET. Some of these are made to order, so delays can be as long as 6 weeks before shipping.
Standard
The 3-speed motor barrel is plated in yellow zinc to the correct level of gloss.
Motor barrel end cover is silver zinc plated.
Motor barrel does not have the correct Chrysler part # and date code.
Pole shoe screws in the barrel are either a Phillips-head or flat-head style, depending on what was origin
6 parts match
Premium
The 3-speed motor barrel is plated in yellow zinc to the correct level of gloss.
Motor barrel end cover is silver zinc plated.
Motor barrel does have the correct Chrysler part # and date code stamped into it.
Pole shoe screws in the barrel are either a Phillips-head or flat-head style, depending on what was originally used on that
particular motor, and are silver zinc plated.
The aluminum motor housing has a natural grey finish.
The switch plate cover is natural grey, except for 1968 models made before December 31 which are silver with a countersunk
insulator.
The soldered connections and the screw on the lower left side of the switch plate is sealed with a reddish-brown medium gloss
sealer to prevent moisture.
The wiring harness that runs from the motor to the bulkhead connector is an oval shrink wrap for all E-body models and 1971
B-body models, for all other models, it is wrapped in a black vinyl wrap.
The cloth-covered wires from th
18 parts match